This is just rough notes for myself.
List the gpart output for each drive in my system.
for drive in $(sysctl -n kern.disks)
do
gpart show $drive
done
gpart: No such geom: da11.
=> 40 9767541088 da10 GPT (4.5T)
40 8392664 - free - (4.0G)
8392704 9758048256 3 freebsd-zfs (4.5T)
9766440960 1100168 - free - (537M)
=> 40 976773088 da9 GPT (466G)
40 2008 - free - (1.0M)
2048 838860800 1 freebsd-zfs (400G)
838862848 137910280 - free - (66G)
gpart: No such geom: da8.
=> 40 9767541088 da7 GPT (4.5T)
40 8392664 - free - (4.0G)
8392704 9758048256 3 freebsd-zfs (4.5T)
9766440960 1100168 - free - (537M)
=> 40 9767541088 da6 GPT (4.5T)
40 8392664 - free - (4.0G)
8392704 9758048256 3 freebsd-zfs (4.5T)
9766440960 1100168 - free - (537M)
=> 34 9767541101 da5 GPT (4.5T)
34 8390622 - free - (4.0G)
8390656 9758048256 3 freebsd-zfs (4.5T)
9766438912 1102223 - free - (538M)
gpart: No such geom: da4.
=> 40 9767541088 da3 GPT (4.5T)
40 8392664 - free - (4.0G)
8392704 9758048256 3 freebsd-zfs (4.5T)
9766440960 1100168 - free - (537M)
=> 40 9767541088 da2 GPT (4.5T)
40 8392664 - free - (4.0G)
8392704 9758048256 3 freebsd-zfs (4.5T)
9766440960 1100168 - free - (537M)
=> 40 9767541088 da1 GPT (4.5T)
40 8392664 - free - (4.0G)
8392704 9758048256 3 freebsd-zfs (4.5T)
9766440960 1100168 - free - (537M)
=> 40 976773088 da0 GPT (466G)
40 2008 - free - (1.0M)
2048 838860800 1 freebsd-zfs (400G)
838862848 137910280 - free - (66G)
=> 40 488397088 ada1 GPT (233G)
40 1024 1 freebsd-boot (512K)
1064 984 - free - (492K)
2048 41943040 2 freebsd-swap (20G)
41945088 446451712 3 freebsd-zfs (213G)
488396800 328 - free - (164K)
=> 40 488397088 ada0 GPT (233G)
40 1024 1 freebsd-boot (512K)
1064 984 - free - (492K)
2048 41943040 2 freebsd-swap (20G)
41945088 446451712 3 freebsd-zfs (213G)
488396800 328 - free - (164K)
gpart: No such geom: nvd1.
=> 40 488397088 nvd0 GPT (233G)
40 488397088 1 freebsd-zfs (233G)
Or better still:
for drive in $(sysctl -n kern.disks) do gpart show $drive done | grep 'No such' gpart: No such geom: da11. gpart: No such geom: da8. gpart: No such geom: da4. gpart: No such geom: nvd1.
So what about those four drives:
[slocum dan ~] % sudo diskinfo da11 da8 da4 nvd1 da11 512 5000981078016 9767541168 4096 0 608001 255 63 da8 512 5000981078016 9767541168 4096 0 608001 255 63 da4 512 5000981078016 9767541168 4096 0 608001 255 63 nvd1 512 240057409536 468862128 0 0
Let’s look in /var/run/dmesg.boot:
da11 at mpr0 bus 0 scbus7 target 31 lun 0 da11:Fixed Direct Access SPC-4 SCSI device da11: Serial Number 989UK04ZFB9G da11: 600.000MB/s transfers da11: Command Queueing enabled da11: 4769307MB (9767541168 512 byte sectors) da8 at mpr0 bus 0 scbus7 target 27 lun 0 da8: Fixed Direct Access SPC-4 SCSI device da8: Serial Number 653DK7WAFS9A da8: 600.000MB/s transfers da8: Command Queueing enabled da8: 4769307MB (9767541168 512 byte sectors) da4 at mpr0 bus 0 scbus7 target 19 lun 0 da4: Fixed Direct Access SPC-4 SCSI device da4: Serial Number 988DK097FB9G da4: 600.000MB/s transfers da4: Command Queueing enabled da4: 4769307MB (9767541168 512 byte sectors) nvd1: NVMe namespace nvd1: 228936MB (468862128 512 byte sectors)
nvd1 is definitely part of a zpool:
[slocum dan ~] % zpool status nvd pool: nvd state: ONLINE scan: scrub repaired 0B in 00:03:50 with 0 errors on Mon Sep 12 04:24:49 2022 config: NAME STATE READ WRITE CKSUM nvd ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 nvd0p1 ONLINE 0 0 0 diskid/DISK-C26D07890DC400015192p1 ONLINE 0 0 0 errors: No known data errors
Let’s look at some GEOM labels:
[slocum dan ~] % glabel list | less Geom name: nvd1 Providers: Geom name: nvd1 Providers: 1. Name: diskid/DISK-C26D07890DC400015192 Mediasize: 240057409536 (224G) Sectorsize: 512 Mode: r1w1e2 secoffset: 0 offset: 0 seclength: 468862128 length: 240057409536 index: 0 Consumers: 1. Name: nvd1 Mediasize: 240057409536 (224G) Sectorsize: 512 Mode: r1w1e3
So why no partitions on nvd1.
I guess I gave all of the drive to ZFS. I don’t usually do that.
