This post has been replaced by a new one.
I’ve been given a Dell PowerEdge 720. It contains 8 x 400GB SSDs.
I’ve added in a SAS 9207-8i card, as mentioned yesterday.
FreeBSD is not installed. I booted the system up via mfsBSD and had a look at dmesg output.
root@mfsbsd:~ # cat /var/run/dmesg.boot ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz (3000.06-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 412316860416 (393216 MB) avail memory = 401800478720 (383186 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads arc4random: no preloaded entropy cache ioapic1: Changing APIC ID to 1 ioapic2: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard Launching APs: 29 26 22 16 25 8 7 34 19 9 21 11 36 17 6 15 37 38 31 2 20 14 24 23 10 4 35 30 33 18 1 32 39 12 3 27 13 28 5 Timecounter "TSC-low" frequency 1500029953 Hz quality 1000 random: entropy device external interface md0: Preloaded image </mfsroot> 69632000 bytes at 0xffffffff8263cd00 kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: memory range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: memory range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xfcc0-0xfcdf mem 0xd8d00000-0xd8dfffff,0xd8ff8000-0xd8ffbfff irq 36 at device 0.0 numa-domain 0 on pci1 ix0: using 2048 tx descriptors and 2048 rx descriptors ix0: msix_init qsets capped at 16 ix0: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix0: using 10 rx queues 10 tx queues ix0: Using MSIX interrupts with 11 vectors ix0: allocated for 10 queues ix0: allocated for 10 rx queues ix0: Ethernet address: ec:f4:bb:c0:bd:a0 ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix0: netmap queues/slots: TX 10/2048, RX 10/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xfce0-0xfcff mem 0xd8e00000-0xd8efffff,0xd8ffc000-0xd8ffffff irq 34 at device 0.1 numa-domain 0 on pci1 ix1: using 2048 tx descriptors and 2048 rx descriptors ix1: msix_init qsets capped at 16 ix1: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix1: using 10 rx queues 10 tx queues ix1: Using MSIX interrupts with 11 vectors ix1: allocated for 10 queues ix1: allocated for 10 rx queues ix1: Ethernet address: ec:f4:bb:c0:bd:a2 ix1: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: netmap queues/slots: TX 10/2048, RX 10/2048 pcib2: <ACPI PCI-PCI bridge> irq 53 at device 2.0 numa-domain 0 on pci0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.2 numa-domain 0 on pci0 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd mfi0: <Dell PERC H710P Mini (monolithics)> port 0xec00-0xecff mem 0xd9ffc000-0xd9ffffff,0xd9f80000-0xd9fbffff irq 42 at device 0.0 numa-domain 0 on pci3 mfi0: Using MSI mfi0: Megaraid SAS driver Ver 4.23 mfi0: FW MaxCmds = 1008, limiting to 128 mfi0: MaxCmd = 1008, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03f0 mfi0: 3347 (623637705s/0x0020/info) - Shutdown command received from host mfi0: 3348 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 005b/1000/1f34/1028) mfi0: 3349 (boot + 4s/0x0020/info) - Firmware version 3.131.05-8148 mfi0: 3350 (boot + 5s/0x0008/info) - Battery Present mfi0: 3351 (boot + 5s/0x0020/info) - Package version 21.3.5-0002 mfi0: 3352 (boot + 5s/0x0020/info) - Board Revision A03 pcib4: mfi0: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 03353 (boot + 6s/0x0008/info) - Battery temperature is normal mfi0: on pci0 pci4: 3354 (boot + 6s/0x0008/info) - Current capacity of the battery is above threshold mfi0: <ACPI PCI bus> numa-domain 0 on pcib4 3355 (boot + 18s/0x0002/info) - Unexpected sense: Encl PD 20 Path 5d81f060f8cf7b00, CDB: 1c 01 00 00 20 00, Sense: 6/29/00 mfi0: 3356 (boot + 20s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored mfi0: 3357 (boot + 20s/0x0002/info) - Inserted: Encl PD 20 mfi0: 3358 (boot + 20s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5d81f060f8cf7b00,0000000000000000 mfi0: 3359 (boot + 20s/0x0002/info) - Inserted: PD 00(e0x20/s0) pcib5: mfi0: <ACPI PCI-PCI bridge> irq 53 at device 3.2 numa-domain 03360 (boot + 20s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e820027419d2,0000000000000000 on pci0 pci5: mfi0: 3361 (boot + 20s/0x0002/info) - Inserted: PD 01(e0x20/s1) mfi0: <ACPI PCI bus> numa-domain 0 on pcib5 3362 (boot + 20s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e8200275bf02,0000000000000000 mfi0: 3363 (boot + 20s/0x0002/info) - Inserted: PD 02(e0x20/s2) mfi0: 3364 (boot + 20s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e82002741d72,0000000000000000 mfi0: 3365 (boot + 20s/0x0002/info) - Inserted: PD 03(e0x20/s3) mfi0: 3366 (boot + 20s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e8200275be06,0000000000000000 mfi0: 3367 (boot + 20s/0x0002/info) - Inserted: PD 04(e0x20/s4) mfi0: 3368 (boot + 20s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e8200273d5e2,0000000000000000 mfi0: 3369 (boot + 20s/0x0002/info) - Inserted: PD 05(e0x20/s5) mfi0: 3370 (boot + 20s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e82002759722,0000000000000000 mfi0: 3371 (boot + 20s/0x0002/info) - Inserted: PD 06(e0x20/s6) mfi0: 3372 (boot + 20s/0x0002/info) - Inserted: PD 06(e0x20/s6) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e820027598d2,0000000000000000 mfi0: 3373 (boot + 20s/0x0002/info) - Inserted: PD 07(e0x20/s7) pcib6: mfi0: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 03374 (boot + 20s/0x0002/info) - Inserted: PD 07(e0x20/s7) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e82002740fde,0000000000000000 on pci0 pci6: mfi0: 3375 (boot + 20s/0x0002/info) - Inserted: PD 08(e0x20/s8) mfi0: <PCI bus> numa-domain 0 on pcib6 3376 (boot + 20s/0x0002/info) - Inserted: PD 08(e0x20/s8) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500056b37789abe4,0000000000000000 mfi0: 3377 (boot + 20s/0x0002/info) - Inserted: PD 09(e0x20/s9) mfi0: 3378 (boot + 20s/0x0002/info) - Inserted: PD 09(e0x20/s9) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500056b37789abe5,0000000000000000 mfi0: 3379 (boot + 20s/0x0002/info) - Inserted: PD 21(e0x00/s0) pci0: mfi0: <simple comms> at device 22.0 (no driver attached) 3380 (boot + 20s/0x0002/info) - Inserted: PD 21(e0x00/s0) Info: enclPd=00, scsiType=7f, portMap=00, sasAddr=500056b37789abfd,0000000000000000 mfi0: 3381 (boot + 63s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 5001e820027419d2, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00 mfi0: 3382 (boot + 63s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 5001e8200275bf02, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00 mfi0: 3383 (boot + 63s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 5001e82002741d72, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00 pci0: mfi0: 3384 (boot + 63s/0x0002/info) - Unexpected sense: PD 03(e0x20/s3) Path 5001e8200275be06, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00 mfi0: <simple comms> at device 22.1 (no driver attached) 3385 (boot + 63s/0x0002/info) - Unexpected sense: PD 04(e0x20/s4) Path 5001e8200273d5e2, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00 mfi0: 3386 (boot + 63s/0x0002/info) - Unexpected sense: PD 05(e0x20/s5) Path 5001e82002759722, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00 mfi0: 3387 (boot + 63s/0x0002/info) - Unexpected sense: PD 06(e0x20/s6) Path 5001e820027598d2, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00 mfi0: 3388 (boot + 63s/0x0002/info) - Unexpected sense: PD 07(e0x20/s7) Path 5001e82002740fde, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00 ehci0: mfi0: 3389 (623686699s/0x0020/info) - Time established as 10/06/19 14:18:19; (64 seconds since power on) mfi0: 3390 (623686911s/0x0020/info) - Host driver is loaded and operational <Intel Patsburg USB 2.0 controller> mem 0xdc8fd000-0xdc8fd3ff irq 23 at device 26.0 numa-domain 0 on pci0 usbus0: EHCI version 1.0 usbus0 numa-domain 0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib7: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xdae80000-0xdaefffff,0xdaff8000-0xdaffbfff irq 19 at device 0.0 numa-domain 0 on pci8 igb0: attach_pre capping queues at 8 igb0: using 1024 tx descriptors and 1024 rx descriptors igb0: msix_init qsets capped at 8 igb0: pxm cpus: 10 queue msgs: 9 admincnt: 1 igb0: using 8 rx queues 8 tx queues igb0: Using MSIX interrupts with 9 vectors igb0: allocated for 8 tx_queues igb0: allocated for 8 rx_queues igb0: Ethernet address: ec:f4:bb:c0:bd:a4 igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xdaf00000-0xdaf7ffff,0xdaffc000-0xdaffffff irq 18 at device 0.1 numa-domain 0 on pci8 igb1: attach_pre capping queues at 8 igb1: using 1024 tx descriptors and 1024 rx descriptors igb1: msix_init qsets capped at 8 igb1: pxm cpus: 10 queue msgs: 9 admincnt: 1 igb1: using 8 rx queues 8 tx queues igb1: Using MSIX interrupts with 9 vectors igb1: allocated for 8 tx_queues igb1: allocated for 8 rx_queues igb1: Ethernet address: ec:f4:bb:c0:bd:a5 igb1: netmap queues/slots: TX 8/1024, RX 8/1024 pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0 pci9: <ACPI PCI bus> numa-domain 0 on pcib9 pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 pci10: <PCI bus> numa-domain 0 on pcib10 pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 pci11: <PCI bus> numa-domain 0 on pcib11 pcib12: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci11 pci12: <PCI bus> numa-domain 0 on pcib12 vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdbffc000-0xdbffffff,0xdb000000-0xdb7fffff irq 19 at device 0.0 numa-domain 0 on pci12 vgapci0: Boot video device pcib13: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci10 pci13: <PCI bus> numa-domain 0 on pcib13 ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdc8fe000-0xdc8fe3ff irq 22 at device 29.0 numa-domain 0 on pci0 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib14: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 pci14: <PCI bus> numa-domain 0 on pcib14 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 ahci0: <Intel Patsburg AHCI SATA controller> port 0xdce8-0xdcef,0xdcf8-0xdcfb,0xdcf0-0xdcf7,0xdcfc-0xdcff,0xdcc0-0xdcdf mem 0xdc8ff000-0xdc8ff7ff irq 20 at device 31.2 numa-domain 0 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pci15: <ACPI PCI bus> numa-domain 1 on pcib15 pcib16: <ACPI PCI-PCI bridge> irq 85 at device 1.0 numa-domain 1 on pci15 pci16: <ACPI PCI bus> numa-domain 1 on pcib16 pcib17: <ACPI PCI-PCI bridge> irq 85 at device 2.0 numa-domain 1 on pci15 pci17: <ACPI PCI bus> numa-domain 1 on pcib17 pcib18: <ACPI PCI-PCI bridge> irq 85 at device 3.0 numa-domain 1 on pci15 pci18: <ACPI PCI bus> numa-domain 1 on pcib18 mps0: <Avago Technologies (LSI) SAS2308> port 0xbc00-0xbcff mem 0xd0ff0000-0xd0ffffff,0xd0f80000-0xd0fbffff irq 80 at device 0.0 numa-domain 1 on pci18 mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd mps0: IOCCapabilities: 5a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc> pcib19: <ACPI PCI-PCI bridge> irq 85 at device 3.2 numa-domain 1 on pci15 pci19: <ACPI PCI bus> numa-domain 1 on pcib19 pcib20: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 pci20: <ACPI PCI bus> numa-domain 0 on pcib20 pci20: <dasp, performance counters> at device 14.1 (no driver attached) pci20: <dasp, performance counters> at device 19.1 (no driver attached) pci20: <dasp, performance counters> at device 19.5 (no driver attached) pcib21: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pci21: <ACPI PCI bus> numa-domain 1 on pcib21 pci21: <dasp, performance counters> at device 14.1 (no driver attached) pci21: <dasp, performance counters> at device 19.1 (no driver attached) pci21: <dasp, performance counters> at device 19.5 (no driver attached) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (9600,n,8,1) orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb800-0xcbfff,0xec000-0xeffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est1 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est2 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est3 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est4 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est5 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est6 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est7 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est8 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est9 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est10 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est11 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est12 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est13 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est14 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est15 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est16 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est17 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est18 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est19 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est20 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est21 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est22 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est23 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est24 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est25 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est26 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est27 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est28 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est29 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est30 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est31 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est32 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est33 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est34 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est35 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est36 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est37 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est38 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 245900002100 device_attach: est39 attach returned 6 Timecounters tick every 1.000 msec arc4random: no preloaded entropy cache ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device cd0 at ahcich4 bus 0 scbus4 target 0 lun 0 cd0: <TSSTcorp DVD-ROM SN-108DN D150> Removable CD-ROM SCSI device cd0: Serial Number S1116YCF1001F0 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed random: unblocking device. arc4random: no preloaded entropy cache Trying to mount root from ufs:/dev/md0 []... arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache uhub0: arc4random: no preloaded entropy cache 2 ports with 2 removable, self powered uhub1: arc4random: no preloaded entropy cache 2 ports with 2 removable, self powered arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub2 numa-domain 0 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub3 numa-domain 0 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 uhub3: 6 ports with 6 removable, self powered uhub2: 8 ports with 8 removable, self powered ugen0.3: <ATEN UC-10KM V1.3.124> at usbus0 ukbd0 numa-domain 0 on uhub3 ukbd0: <HID Keyboard> on usbus0 kbd2 at ukbd0 ugen0.4: <no manufacturer Gadget USB HUB> at usbus0 uhub4 numa-domain 0 on uhub3 uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 4> on usbus0 ugen1.3: <Lexar USB Flash Drive> at usbus1 umass0 numa-domain 0 on uhub2 umass0: <Lexar USB Flash Drive, class 0/0, rev 2.10/11.00, addr 3> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:8:0: Attached to scbus8 da0 at umass-sim0 bus 0 scbus8 target 0 lun 0 da0: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-4 SCSI device da0: Serial Number AALPN3HOGJFA0U42 da0: 40.000MB/s transfers da0: 30526MB (62517248 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> uhub4: 6 ports with 6 removable, self powered GEOM: da0: the secondary GPT header is not in the last LBA. GEOM: diskid/DISK-AALPN3HOGJFA0U42: the secondary GPT header is not in the last LBA. ugen0.5: <Avocent Keyboard/Mouse Function> at usbus0 ukbd1 numa-domain 0 on uhub4 ukbd1: <Keyboard> on usbus0 kbd3 at ukbd1 lo0: link state changed to UP ix0: link state changed to UP igb1: link state changed to UP root@mfsbsd:~ #
